Electric bicycles are a relatively common means of transportation, and the energy source is batteries. As we all know, the storage capacity of the battery is limited, and now there are requirements for the quality of electric bicycles, so the battery cannot be made too large. So many people will ask, is there any way to save electricity? Do I ride fast or slow to save power? Below I will share with you five practical tips to let you ride 20 kilometers more!
Tip 1: Charge regularly.
The battery is the only source of power for an electric bicycle, so how to charge it regularly is the key to whether it can run far. In daily life, it is best not to use up the battery to recharge and overcharge. Because these two situations will cause the electrolyte to react excessively with the lead plate, resulting in the crystallization of the lead plate and the bulging of the battery, which will seriously affect the battery life.
Tip 2: Don’t start quickly or brake hard frequently.
In the actual riding process, it is best not to start quickly and brake frequently. Because when starting, the turning handle will be directly screwed to the maximum, and a large current will be released in an instant. The same is true for frequent braking, which reduces the speed and then accelerates to start, which consumes more power.
Tip 3: The lead-acid battery should be replenished in time.
This is mainly for electric bicycles with lead-acid batteries. Because the working principle of lead-acid batteries is that the electrolyte reacts with the positive and negative lead plates. Generally, a temperature is generated during daily riding or charging, which causes the electrolyte to evaporate. Therefore, it is generally necessary to replenish the electrolyte once every two years. It is best to go to the repair shop to find a professional to replenish it.
Tip 4: The controller borrows electricity.
This method is mainly for electric bicycles that run out of electricity halfway and uses the principle of the controller under voltage. By lowering the high voltage, the battery has enough power to drive the controller. The specific operation is to find the hidden controller conversion cable under the seat cushion or the carriage, just plug in the voltage conversion cable, and you can ride for another 5-10 kilometers.
Tip 5: Use boosters.
Finally, it is also said that in the case of no electricity halfway, you can buy an inexpensive booster online. It can be pushed away when the power is low or when there is no power. In addition, it is also very practical in the case of a flat tire.
In general, in real life, if you want to save more power, you can ride at a constant speed of about 25km/h, which will save more power. And for electric bikes, this speed is enough. If you want to learn more about electric bikes, welcome to read other articles on this site!